Ferrous and Non Ferrous Metal

Bronze Round Bar

Bronze alloy LG2 is a general purpose leaded gun-metal conforming to the require ments of Australian standard and the equivalent to British Standard alloy LG2. Due to substantial amount of lead (Pb) 83600A has excellent machining qualities, medium strength, good pressure tightness and is not subject to dezincification (Category 1 al loy). Has excellent resistance to superheated steam applications and has reasonable corrosion resistance to seawater and brine, making is suitable for pump and valve com ponents.

Bronze Hollow Tubes

Bronze alloy LG2 is a general purpose leaded gun-metal conforming to the require ments of Australian standard and the equivalent to British Standard alloy LG2. Due to substantial amount of lead (Pb) 83600A has excellent machining qualities, medium strength, good pressure tightness and is not subject to dezincification (Category 1 al loy).Has excellent resistance to superheated steam applications and has reasonable corrosion resistance to seawater and brine, making is suitable for pump and valve com ponents.

Bronze Hexagonal Bars

Copper Round Bar

Copper bar and flats are stocked in 110 Copper ASTM B 152 mill finish. 110 round bar is used for electrical components, power transmission compo nents, automotive spark plug electrodes, re sistance welding electrodes, terminals, and high conductivity items for use at raised temperatures.

Copper Sheets & Flat Bars

Copper sheets are popular products for uses such as coins, architecture, motor vehicles, structural engineering, and medical equipment. We supply copper sheet products that are versatile in use but also reliable in application.

Copper Tubing

Copper tubing is most often used for heat ing systems, and as a refrigerant line in HVAC systems. Copper tubing is slowly being replaced by PEX tubing in hot and cold water applications. There are two basic types of copper tubing, soft copper and rigid copper. Copper tubing is joined using flare connection, compression connection, pressed connection, or solder. Copper offers a high level of corrosion resistance.

Brass Flat Bars

Brass Flat Bars are also been used for decoration purposes like sign boards and engraving designs on walls and pillars. Brasses have high corrosion resis tance and high tensile strength. They are also suited to fabrication by hot forg ing. Free machining grades of brass set the standard for machining, by which other metals are compared.

Brass Rods

CZ121 Brass Rod. CZ121 is the standard European grade of free-machining brass consisting of a duplex structure and a 3% lead addition. The particles of lead are finely dispersed throughout the microstructure and act as both a lubri cant and a chip breaker to give the alloy its free machining characteristics.

Available in Round, Hex and Square Shapes.

Brass Sheets

Brass sheets and plates are used in applications where a light, strong sheet or plate of metal is needed. These can be manufactured and cut in many different shapes and sizes. For electrical devices and components, brass coils are used be cause they are able to conduct electricity and resist corrosion.

Aluminium Round Bar

Aluminium Flat Bar

Aluminium Square Bar

The T6 refers to the temper or degree of hardness, which is achieved by precipitation hardening. This grade has a good strength-to-weight ratio and is also heat-treatable. With great formability and weld ability, it is used for engineering and structural applications, boats, furniture, and more.

Cast Iron

Grade 250 Cast Iron – EN-GLJ-250 Grade 250 is a grey cast iron which contains graphite in the form of flakes (also known as Flake Graphite Iron), grey iron has good compressive strength and offers good damping characteristics. In common with all grey iron grades, EN-GJL-250 is readily machinable.

Zinc Round Bar

Zinc Anode Round Bar available from 12mmx300mm upto 250mmx300mm provides Anti-Corrosion Cathodic Protection in Salt Water. Used in ships, steel piles, floating dock and so on.

Carbon (Graphite) Rods

Graphite rods are mainly used in heat treating and electrochemical applications. They are also used to support beams or hearth rails to allow for thermal expansion. More uses include fixtures or support posts, stir sticks, electrodes, and other reaction purposes.

EN8 - Carbon and Alloy Steel

EN8 is an unalloyed medium carbon steel which is used in applications where better properties than mild steel are required but where the costs do not justify the purchase of a steel alloy. EN8 can be heat treated to provide a good surface hardness and moderate wear resistance by flame or induction hardening processes.

Galvanized Perforated Sheets

Perforated metal can be used for structural and decorative applications in architecture and design, including balustrades, facades, stairs and screens, and its characteristics allow for creativity with light, sound and visual depth. Perforated metal can be used to regulate light and ventilation within a space. Available in various thicknesses, hole diameters and pitches

EN24 - Carbon and Alloy Steel

EN24 is used in components subject to high stress and with a large cross section. This can include aircraft, automotive and general engineering applications for example propeller or gear shafts, connecting rods, aircraft landing gear components.

EN19 - Carbon and Alloy Steel

EN19 is a high quality alloy steel with tensile strength. With a combination of good ductility and shock resistance, EN19 is suitable for applications with very high loading such as engine gear boxes.

Lead Sheets

We stock lead sheets from 1mm to 6 mm thickness. This sheets are used in acid-proof environment construction, medical radiation protection, X-ray, CT room radiation protection, aggravation and sound insulation

Page updated

Google Sites

Report abuse